This is how to watch video streams from an N3000 on VLC
Step 1: On your N3000 encoder open its webpage click stream settings and select which streaming option that you wish for the endoder to output. Note: If you are running an older version of firmware you may not have the option to change this from the default
Once Clicked The Stream Settings Section should look like this:
Step 2: Ensure that all firewalls are disabled. If you are running windows this option is usually under your control panel.
Step 3: In the top right corner of your encoders webpage there will be an address starting with rtp, udp etc. copy this entire address.
Step 4: Open VLC and select the option for open network stream and place the copied url into the empty box and press play in the bottom right of the window . Then your video should be displayed.